JDCELECTROMAGNETIC SHEETMETALI MAFAKA
JDC KOBA • MANAKO EA MOSEBETSI
bakeng sa
MEHLALA 650E, 1000E& 1250E
Litaba
LIEKETSENG
KOPANO
LIEKETSENG TS'OANELO
TS'OHLO LESAKA
SEBELISA JDCBEND
MOSEBETSI OA MOTHEO
MATLA SHEAR KEKETSO
MOLEMO O METSOE (HEM)
RELEBOHILE MOTS'OANE
LEKOA LEKOA
MABOOKSI (LI-CLAMPBARS TSE KHUTŠOANE)
LITŠEBELE (LI-CLAMPBARS TSE SOTLWENG)
SEBELISA MORAKO
JDC KOBAMELA SEBAKA
The JdcbendMochini o kobehang oa sheetmetal ke mochini o feto-fetohang haholo ebile o bonolo ho o sebelisa bakeng sa ho kobeha mefuta eohle ea tšepe e kang aluminium, koporo, tšepe le tšepe e sa hloekang.
Sistimi ea li-electromagnetic clampinge fana ka bolokolohi bo eketsehileng ba ho theha workpiece ka libopeho tse rarahaneng.Ho bonolo ho theha li-chan nels tse tebileng haholo, likarolo tse koetsoeng, le mabokose a tebileng a thata kapa a ke keng a khoneha mochining o tloaelehileng.
Sistimi e ikhethang ea hinginge sebelisetsoang ho kobeha beam e fana ka mochine o bulehileng ka ho feletseng ka tsela eo e atolosang matla a eona a mangata.Moralo oa sethala se le seng le ona o kenya letsoho ho tenyetseheng ha mochini ka ho fana ka phello ea "matsoho a mahala" lipheletsong tsa mochini.
Bonolo ba tšebelisoe phalla ho tloha taolong ea menoana ea clamping le unclamping, boiketlo le ho nepahala ha tekano ea bend, le phetoho e ikemetseng bakeng sa botenya ba sheetmetal.
Motsoako oa matsoho a mabelie fana ka polokeho bakeng sa mosebeletsi.
Hantle-ntletšebeliso ea matla a khoheli e bolela hore meroalo e kobehang e nkuoa hantle moo e hlahisoang teng;matla ha aa lokela ho fetisetsoa ho mehaho ea tšehetso lipheletsong tsa mochine.Sena se bolela hore setho se tlamellang ha se hloke bongata ba sebopeho, ka hona se ka etsoa hore se kopane le ho se sitise.(Botenya ba clampbar bo khethoa feela ke tlhoko ea eona ea ho tsamaisa matla a khoheli a lekaneng eseng ka menahano ea sebopeho ho hang).
Lihinge tse khethehileng tse se nang setsili ntlafalitsoe haholo-holo bakeng sa Jdcbend, 'me li ajoa ho latela bolelele ba sefate se kobehang, ka hona, joalo ka clampbar, nka meroalo e kobehang haufi le moo e hlahisoang teng.
Phello e kopantsoeng eamakenete clampingka e khethehilenglihokelo tse se nang setsiho bolela hore Jdcbend ke mochine o monyane haholo, o bolokang sebaka, o nang le tekanyo e phahameng haholo ea boima ba 'mele.
Ho fumana boholo ba mochini oa hau,ka kopo bala bukana ena, haholo-holo karolo e nang le sehlooho se reng HO SEBELISA JDCBEND.Ka kopo, khutlisetsa REGISTRATION ea WAR-RANTY kaha sena se tla nolofatsa likopo tsohle tlas'a tiisetso hape se fa moetsi rekoto ea aterese ea hau e thusang ho tsebisa bareki ka ntlafalo efe kapa efe e ka ba tsoelang molemo.
KOPANO...
KOPANO LITS'OANELO
1. Hlakola kholomo le maoto 'me u fumane pakete ea li-fasteners le senotlolo sa 6 mm Allen.
2.Hokela maoto kholeng.Maoto a mabeli a nang le teipi ea tšireletso e ntšo le e mosehla e lokela ho supa pele ho tloha kholomong.(Sefahleho se ka pele sa kholomo ke lehlakore le se nang sehokelo ho lona.)
Sebelisa likonopo tsa MIO x 16 tsa hlooho ho hokela maoto.
3.Mehlala ea 650E le 1000E: Hokela letlapa ka tlas'a malebela a maoto a ka pele.Sebelisa li-screw tse peli tsa MIO x 16 tse nang le li-washer.Ho tsamaisana ha masoba a screw ho tla nolofalloa haeba li-screws tsa maoto li ka tloheloa li lokolohile ho fihlela ka mor'a hore letlapa la leoto le kenngoe.The M8 x 20 cap-head screws maotong a ka morao a ka lokisoa ho lekana mochini le ho lumellana le ho se lekane hofe kapa hofe ha fatše.
Setšoantšo sa 1250E: Letlapa la leoto ha le fanoe ka mochini ona;e tlameha ho tlamelloa fatše maotong a ka pele.
4.Ka thuso ea mothusi beha mochine oa Jdcbend ka hloko sethaleng 'me u se sireletse ka M8 x 16 cap-head screws.
Mefuta ea 650E & 1000E: Etsa bonnete ba hore u tataisa lithapo le sehokelo ho theosa kholomong ha mochini o ntse o theoleloa setulong.
5.Mehlala 650E & 1000E: Tlosa karolo e ka morao ea motlakase 'me u kopanye sehokelo sa li-pin tse 3.Sena se hokahanya electromagnet 'meleng oa mochini le yuniti ea motlakase kholomong.Fetola phanele.Setšoantšo sa 1250E: Tlamella sekotwana sa thapo e kholo ka morao ho kholomo ka M6 x 10 pan-head screw.
6.Mohlala 650E: Kopanya lihalofo tse peli tsa terei u sebelisa li-pan-head tsa M6 le linate.Hokela terei (e nang le 'mete oa rabara) ka morao ho mochini o sebelisa li-screws tse peli tsa M8 x 12 cap-head.Kenya li-backstop tse peli mahlakoreng a terei.
Mefuta ea 1000E le 1250E: Hokela li-backstop tse peli ka morao ho mochini o sebelisa li-screw tse peli tsa M8 x 16 bakeng sa bar ka 'ngoe.Hokela terei (e nang le 'mete oa rabara) ka morao ho mochini o sebelisa li-screws tse tharo tsa M8 x 16 cap-head.Kenya molala oa setopo holim'a bar e 'ngoe le e 'ngoe e ka morao.
7.Hokela (li)hape ka li-screws tsa cap-head tsa M8 x 16.
Mefuta ea 650E le 1000E: Mohele o lokela ho thelleloa fatše ka lehlakoreng le bontšang selikalikoe pele o kenya letsoho.
Setšoantšo sa 1250E: Mohele o nang le sekala sa angle o tlameha ho kenngoa ka lehlakoreng le letšehali, 'me molala oa ho emisa o thelle holim'a oona ebe o tlamelloa haufi le karolo e ka holimo ea mofeng.
8.Mohlala 1250E: Tsamaisetsa leballo le kobehang holimo ho 180 °.Hlakola a-
gle indicator ebe o fetisa Indicator Slide hodima motshwaro o ka ho le letshehadi.Hlakola li-screws tse peli tsa cap-head tsa M8 ho tloha ho indicator ankora-block e tlameletsoeng motheong oa mochine haufi le mofeng o ka letsohong le letšehali.Hokela Li-Indicator Arms ho ankora-block 'me u hatelle li-screws tse peli tsa M8 cap-head ka letsoho, 'me u sebelisa senotlolo sa 6 mm Allen, tiisa likurufu ka bobeli ka thata haholo.
Hlokomela:Mochini o kanna oa se BULE haeba likurufu tsena li sa tiea.
9. Ho sebelisa motsoako o nang le chlorinated (kapa peterole) hloekisa lesela le hlakileng le kang boka bokaholimo bo sebetsang ba mochini.
10. Beha li-clamp bar tse khutšoane ka har'a terei le thipa ea bolelele bo felletseng holim'a mochini o nang le libolo tsa ona tse lutseng ka har'a li-grooves sebakeng se kaholimo sa mochini.
11.Hokela ka har'a sesebelisoa sa motlakase 'me u bulele senotlolo se seholo.Mochini o se o lokile
bakeng sa ts'ebetso - ka kopo sheba "BASIC OPERATION1' bukeng ena.
| Setšoantšo sa 650E | 625 limilimithara x 1.6 limilimithara | (2ftx 16g) | 72 lik'hilograma |
| Mohlala 1000E | 1000 mm x 1.6 mm | (3ft x 16g) | ha ho kg |
| Setšoantšo sa 1250E | 1250 limilimithara x 1.6 limilimithara | (4ftx 16g) | 150 lik'hilograma |
TS'ELISO MATLA
Kakaretso ea matla a nang le clamp-bar e tloaelehileng ea bolelele bo felletseng:
LEBITSO LEKHONO
Boima ba Mochini
| Setšoantšo sa 650E | 4.5 Lithane |
| Mohlala 1000E | Lithane tse 6 |
| Setšoantšo sa 1250E | 3 Tonne |
MOTLATSI
1 Phase, 220/240 V AC
Hona joale:
| Setšoantšo sa 650E | 4 Amp |
| Mohlala 1000E | 6 Am |
| Setšoantšo sa 1250E | 8 Am |
Nako ea mosebetsi: 30%
Tšireletso: Thermal cutout, 70°C
Control:Konopo ea ho qala ...pele ho clamping force
Ho kobeha beam microswitch...fill clamping
Interlock...konopo ea ho qala le leballo le kobehang li tlameha ho sebetsoa ka tatellano e nepahetseng e fetelletseng ho qala matla a ho kokota ka botlalo.
HINGES
Moqapi o khethehileng o se nang setsi ho fana ka mochine o bulehileng ka ho feletseng.
Tsela ea ho potoloha: 180 °
KHOBANE LIEKETSENG
KHOBANE KHOBANE
| TŠEBELETSO (kotulo / khatello ea maikutlo ea ho qetela) | TS'OANE |
| Tšepe e bonolo (250/320 MPa) | 1.6 limilimithara |
| 1.2 limilimithara | |
| 1.0 limilimithara | |
| AluminiumGrade 5005 H34(140/160 MPa) | 1.6 limilimithara |
| 1.2 limilimithara | |
| 1.0 limilimithara | |
| Ts'epe e sa beng le mabali Likereiti 304,316 (210/600 MPa) | 1.0 limilimithara |
| 0.9 limilimithara | |
| 0.8 limilimithara |
| LEBOLE LE LEBETSA | KHOBANG RADIUSI |
| (bonyane) | (e tloaelehileng) |
| 30 mm* | 3.5 limilimithara |
| 15 limilimithara | 2.2 limilimithara |
| 10 limilimithara | 1.5 limilimithara |
| 30 mm* | 1.8 limilimithara |
| 15 limilimithara | 1.2 limilimithara |
| 10 limilimithara | 1.0 limilimithara |
| 30 mm* | 3.5 limilimithara |
| 15 limilimithara | 3.0 limilimithara |
| 10 limilimithara | 1.8 limilimithara |
(Ha o sebelisa clamp-bar e tloaelehileng ea bolelele bo felletseng ho koba sesebedisoa sa bolelele bo felletseng)
* E na le bar e atolositsoeng e kentsoeng ho bekeng e kobehang.
KHUTS'OA KHOTSO-BAR SETE
Bolelele: Mohlala 650E: 25, 38, 52, 70, 140, 280 mm
Mehlala 1000E & 1250E: 25, 38, 52, 70, 140, 280, 597 limilimithara
Bophahamo bohle (ntle le 597 mm) bo ka hokeloa hammoho ho etsa moeli o kobehang ka har'a 25 mm ea bolelele bofe kapa bofe bo lakatsehang ho fihla ho 575 mm.
RETS'ELISITSOE CLAMPBAR
Ha e fanoe, sete e khethehileng ea limilimithara tse 8 tse bophara ba limilimithara li fana ka ho etsa boholo ba literei ka mefuta e bontšitsoeng ka tlase:
* Bakeng sa literei tse tebileng sebelisa Short Clamp-bar set.
| MOHLALA | TERE TELELE | MAX.TRAI BOTEBO |
| 650E | 15 ho isa ho 635 limilimithara | 40 limilimithara* |
| 1000E | 15 ho isa ho 1015 mets | 40 limilimithara* |
| 1250E | 15 ho isa ho 1265 limilimithara | 40inm* |
MEHLALA 650E/ 1000E
PHAHAMA KA PELE LE MATLAKO (mm)
MOHLALA SERIALI NO. LETSATSI
LIEKETSENG LEFATŠE
Lekanya khanyetso ho tloha ho mains plug earth pin ho ea ho magnet body .... ohm
KHAOHO MOTLATSI
Megger ho tloha ho coil ho ea ho 'mele oa makenete
LITEKO TSA MAN/MAX SUPPLY VOLTAGE
Ka 260v: Pre-clamp.... full-clamp.... lokolla
Ka 200v: Pre-clamp.... lokolla
Pre-clamp.... full-clamp.... lokolla
TS'ELISO TS'OANE
Ha motlakase o buletsoe, hula HANDLE, ebe o tobetsa konopo ea QALA.
Sheba hore mochini ha o sebetse
TS'OELA/ TSAMAYA MAKOANE
Movement of Bending Beam ho kenya tšebetsong clamping e felletseng,
e lekantsoeng botlaaseng ba leballo le kobehang.(limilimithara tse 4 ho isa ho tse 6) limilimithara
Khutlisetsa morao mochining o timang.Lekanya morao
ho tloha ho 90 °.(E lokela ho ba ka har'a sebaka sa 15° + 5° ) deg
TS'ELISO TS'OANE
Ho bala pheletsong ea Indicator ha ho behoa leballo
ho isa ho 90° ka sekwere sa moenjiniere.(min 89° , max 91° ) deg
MAGNET MMELE
Ho otloloha ha bokaholimo, haufi le palo e ka pele
(phapang e kholo = 0.5 mm)Imm
Bophahamo ba bokaholimo, ho pholletsa le lipalo
(phapang e kholo = 0.1 mm) mm
KOBAKA LEBAKA
Ho otloloha ha sebaka sa ho sebetsa (phapang e kholo = 0.25 mm)
Ho tsamaisana ha bar e atolositsoeng (phaello e kholo = 0.25 mm)[Hlokomela:Lekola ho otloloha ka mokhoa o nepahetseng.]
MOHLOMI CAMPBAR
Ho otloloha ha moeli o kobehang (phapang e kholo = 0.25 mm) Bophahamo ba phahamiso (ka libolo tse phahamisang ka har'a li-grooves) (min 3 mm)n1n'me lebone le kobehang ho 90 °
ke ntlha e kobehangbapileho, leke mmho tloha, sefate Ka lekhalo le kobehang ka 90 °, na clampbar e ka fetoloa pele hothetsale ka morao ka2 mm
HINGES
Sheba hore na ho na le lubrication holim'a shafts.le li-block blocks
Etsa bonnete ba hore li-hinges li potoloha 180 ° ka bolokolohi le ka thelelo
Sheba hingelikhohlopodo esengpotoloha.'me li fumaneha
Na li-screw nuts tse setseng li notletsoe?
KHOBANE TEKO
(Boemo bo phahameng ka ho fetesisa bo fihla ho 90 °, bonyane motlakase oa phepelo.)
Botenya ba sekhechana sa teko ea tšepe
Bophara ba molomo
mm, Bolelele ba kobeha
mm, sebaka se kobehang
Ho tšoana ha angle e kobehang (ho kheloha ho hoholo = 2 °)
LABELS
Sheba ho hlaka, ho khomarela mochine le ho tsamaisana hantle.
Nameplate & Serial No
Litemoso tsa motlakase
Tlhokomeliso ea Clampbar
Fetoha ho ngola
Theipi ea tšireletso maotong a ka pele
QETELA
Hlahloba bohloeki, ho se be le mafome, likoli jj
MATS'OAO
E Kopantsoeng & E Lekoa .
Tlhahlobo ea QA
MOSEBETSI OA MOTHEO
TLHOKOMELO
Foldara ea tšepe ea Jdc bend sheet e ka sebelisa matla a ho tiisa ka botlalo a lithane tse 'maloa (sheba LITLHAKISO).E na le sehokelo sa matsoho a mabeli ho thusa ho netefatsa hore menoana e ke ke ea ts'oaroa ka mokhoa o sa lebelloang tlasa clampbar ha ho sebelisoa clamping ea electromagnetic.
Leha ho le joalo,ho bohlokoa haholo hore mochine o le mong feela o sebelise mochine ka nako.Ho ka ba kotsi hore motho a le mong a kenye sekhechana sa mosebetsi ebe o tšoara li-clampbars ha e mong a ntse a sebelisa li-switches!
TLOAELEHILE KHOBE
Netefatsa hore motlakase o BULETSOE setsing sa motlakase 'me clampbar e bolelele bo felletseng e behiloe mochining moo libolo tsa eona tsa ho phahamisa li lutse ka har'a li-grooves tse fihlang pheletsong ka 'ngoe.
1.Adjust bakeng sa workpiece botenyaka ho potoloha li-adjule tsa eccentric qetellong ea clampbar.Phahamisa leballo le kobehang sebakeng sa 90 ° 'me u hlahlobe hore na le bapile le pheletso ea clampbar - ha ho hlokahala, lokisa li lifti tsa eccentric.
(Bakeng sa liphetho tse nepahetseng, lekhalo le pakeng tsa clampbar le bokaholimo ba seketsoana se kobehang se lokela ho hlophisoa ho feta botenya ba tšepe bo kobehang.)
2.Kenya workpieceebe u sekamisetsa ntlha e ka pele ea clampbar fatše 'me u lokise mola o kobehang moeling o kobehang.
3.Tobetsa 'me u hatelle konopo ea QALA.Sena se sebetsa pele ho clamping.
5.Sefate se kobehang se ka khutlisetsoa morao hoo e ka bang 10 ° ho 15 ° ho tlosa khatello ea mosebetsi bakeng sa ho hlahloba sekhutlo sa bend.Ho khutlisetsa morao ka ho feta 15 ° ho tima mochini ka bo eona ebe ho lokolla karolo ea mosebetsi.
TLHOKOMELO
- Ho qoba kotsi ea ho senya moeli o kobehang oa clampbar kapa ho phunya bokaholimo ba 'mele oa makenete,seke wa beha dintho tse nyane tlasa clampbar.Bolelele bo khothalelitsoeng bo fokolang ka ho sebelisa clampbar e tloaelehileng ke 15 mm, ntle le ha karolo ea mosebetsi e le tšesaane haholo kapa e le bonolo.
- Matla a makenete a fokotseha ha ho chesa.Ka hona ho fumana ts'ebetso e ntle ka ho fetisisakenya clamping nako e telele ho feta kamoo ho hlokahalangho koba.
MATLA SEKOBA(Sehlopha sa boikhethelo)
LITAELO TSA SEBELISA
Motlakase oa matla (o thehiloeng ho Makita Model JS 1660) o fana ka mokhoa oa ho seha sheetmetal ka tsela eo ho sotha ho fokolang ho setseng mosebetsing.Sena se ka etsahala hobane sekuti se tlosa lebala la litšila, le bophara ba limilimithara tse 4, 'me boholo ba ho khopama ho teng ha ho kuta litšepe li kena moqomong ona oa litšila.Bakeng sa ho sebelisoa le Jdcbend sekiri se kentsoe tataiso e khethehileng ea makenete.
The kuta e sebetsa hantle hammoho le Jdcbend Sheetmetal Folder;Jdcbend e fana ka mekhoa e 'meli ea ho tšoara workpiece e tsitsitseng ha e ntse e khaola le mokhoa oa ho tataisa sesebelisoa e le hore ho khonehe ho itšeha haholo.Ho khaola ha bolelele leha e le bofe ho ka sebetsoa ka tšepe ho fihlela ho 1.6 mm botenya kapa aluminium ho fihlela ho 2 mm botenya.
Ho sebelisa sesebelisoa pele beha sheetmetal workpiece tlas'a clampbar ea Jdcbend ebe u e beha e le hore mohala oa ho itšeha o nepahetse.] mmka pel'a moeli oa Beam e Kobehang.
Toggle switch e ngotsoeng "NORMAL / AUX CLAMP,, e tla fumanoa haufi le sesebelisoa se seholo sa ON / OFF. Fetola sena ho boemo ba AUX CLAMP ho tšoara mosebetsi o tiileng ka boemo.
Beha sekiri pheletsong e ka letsohong le letona la Jdcbend 'me u netefatse hore sephutheloana sa tataiso ea makenete se kenella pheletsong e ka pele ea Beam e Behang.Qala ho kuta ka matla ebe o e sutumelletsa ka ho lekana ho fihlela sehiloeng se phethiloe.
Lintlha:
- Bakeng sa ts'ebetso e nepahetseng, sebaka sa "blade clearance" se lokela ho fetoloa hore se lumellane le botenya ba thepa e lokelang ho sehoa.Ka kopo bala litaelo tsa Makita tse fanoeng le sekiri sa JS1660.
- Haeba Shear e sa sehe ka bolokolohi, hlahloba hore na mahare a bohale.
MOPANE MOLOMO
HO phutha Mlomo (HEM)
Mokhoa o sebelisoang ho phutha melomo o itšetlehile ka botenya ba workpiece le ho isa bohōleng bo itseng, ka bolelele le bophara ba eona.
Lisebelisoa tse Thin (ho fihla ho 0.8 mm)
1.Tsoela pele ka mokhoa o tloaelehileng oa ho khumama empa u tsoele pele ho koba ka hohle kamoo ho ka khonehang (135 °).
2.Tlosa clampbar 'me u tlohele workpiece mochineng empa u e tsamaise ka morao hoo e ka bang 10 mm.Joale sutumelletsa leballo le kobehang ho hatella molomo.(Clamping ha ea lokela ho sebelisoa).[Tlhokomeliso: Se ke oa leka ho theha melomo e moqotetsane holim'a lisebelisoa tse teteaneng].
3.Ka li-workpieces tse tšesaane, le/kapa moo molomo o seng moqotetsane haholo, ho batalatsa ka botlalo ho ka fihlelleha ka ho latela ka ho clamping ea makenete feela:
RELEBOHILE MOTS'OANE
TS'EPA MOKHOA
Methapo e phuthetsoeng e entsoe ka ho phuthela sesebedisoa ho pota-potiloe ka tšepe e chitja kapa sekotoana sa phala e teteaneng.
1.Beha workpiece, clampbar le rolling bar joalokaha ho bontšitsoe.
a) Netefatsa hore clampbar ha e fetelle palo e ka pele ea mochini ho "a" kaha sena se ka etsa hore matla a khoheli a koekoe ho feta bar e bilikang, kahoo ho tiisa ho tla fokola haholo.
b) Etsa bonnete ba hore thipa e lutse holim'a palo e ka pele ea tšepe ea mochini oa mochini ("b") 'me e se ke ea khutlela karolong ea aluminium ea bokaholimo.
c) Sepheo sa clanipbar ke ho fana ka tsela ea makenete ("c") ho kena bareng.
2.Wrap workpiece ka moo ho ka khonehang ebe u beha sebaka hape joalokaha ho bontšitsoe.
3.Pheta mohato oa 2 kamoo ho hlokahalang.
TEKO SEKHETHI
LITAELO TSA HO HLAHELA SEKHETHI SA TEKO
Bakeng sa ho tloaelana le mochini oa hau le mofuta oa ts'ebetso e ka etsoang ka ona, ho khothaletsoa hore ho thehoe sengoathoana sa tlhahlobo se hlalositsoeng ka tlase:
1.Khetha sengoathoana sa tšepe ea 0.8 mm e teteaneng kapa lakane ea aluminium 'me u e khaole ho 335 x 200 mm.
2. Tšoaea mela leqepheng joalokaha ho bontšitsoe ka tlase:
3.LekanyaKoba 1'me u thehe molomo moeling oa workpiece.(Bona “MOLEBE O O METSOE”)
4. Fetolela sengoathoana sa teko 'me u se thelle ka tlas'a clampbar, u siee ntlha e mennoeng ho uena.Eketsa clampbar pele 'me u eme hantleKoba 2.Etsa hore ho kobehe hona ho 90 °.Sekhahla sa tlhahlobo se lokela ho shebahala tjena:
…TEKO SEKHETHI
5.Turn sekhechana sa teko 'me u etseBend 3, Bend 4leKoba 5e 'ngoe ho ea ho 90 °
6.Ho phethahatsa sebopeho, sengoathoana se setseng se lokela ho pota-potiloe ho pota-potiloe ka bophara ba 25 mm bareng ea tšepe e pota-potileng.
- Khetha "clamp-bar" ea 280 mm 'me u e behe, sekhechana sa teko le bareng e chitja mochining joalo ka ha ho bonts'itsoe tlasa "ROLLED EDGE" pejana bukeng ena.
- Tšoara bar e pota-potileng ka letsoho le letona 'me u sebelise pre clamping ka ho tobetsa le ho tšoara konopo ea START ka letsoho le letšehali.Joale sebelisa letsoho la hao le letona ho hula leqheka joalokaha eka u etsa ntho e tloaelehileng (konopo ea START e ka lokolloa).Koahela sesebelisoa ka hohle kamoo ho ka khonehang (hoo e ka bang 90 °).Beha sebaka sa mosebetsi (joalokaha ho bonts'itsoe tlas'a "Ho theha Edge Edge") ebe u phuthela hape.Tsoela pele ho fihlela moqolo o koetsoe.
Sebopeho sa teko se felile.
MABOKISO...
HO ETSA MABOKISO (HO SEBEDISA LI-CLAMPBARS TSA MOKHUTSOANE)
Ho na le mekhoa e mengata ea ho beha mabokose le mekhoa e mengata ea ho a mena.JDCBEND e loketse hantle ho theha mabokose, haholo a rarahaneng, ka lebaka la ho feto-fetoha ha maemo a ho sebelisa li-clampbars tse khutšoane ho theha mameno a sa sitisoeng ke mameno a fetileng.
Mabokose a Plain
1.Etsa ho kobeha tse peli tsa pele u sebelisa clampbar e telele joalo ka ho kobeha ho tloaelehileng.
2.Kgetha thipa e le nngwe kapa tse ngata tse kgutshwane le boemo jwaloka ha ho bontshitswe.(Ha ho hlokahale ho etsa bolelele bo nepahetseng kaha koba e tla tsamaisa likheo tsa bonyane20 limilimitharapakeng tsa li-clampbar.)
Bakeng sa ho kobeha ho fihla ho 70 mm ka bolelele, khetha feela sekhechana se seholo ka ho fetisisa se tla lekana.Bakeng sa bolelele bo bolelele ho ka 'na ha hlokahala ho sebelisa likotoana tse' maloa tsa clamp.Khetha feela clampbar e telele ka ho fetisisa e tla lekana, ebe e telele ka ho fetisisa e tla lekana lekhalo le setseng, 'me mohlomong le ea boraro, kahoo e etsa bolelele bo hlokahalang.
Bakeng sa ho kobeha ka makhetlo, likotoana tsa clamp li ka hokeloa hammoho ho etsa yuniti e le 'ngoe e nang le bolelele bo hlokahalang.Ho seng joalo, haeba mabokose a na le mahlakore a sa tebang 'me u na le aclampbar e slotted,joale ho ka 'na ha e-ba kapele ho etsa mabokose ka mokhoa o ts'oanang le li-trays tse sa tebang.(Sheba karolo e latelang: TRAYS)
Mabokose a molomo
Mabokose a nang le melomo a ka etsoa ho sebelisoa sete e tloaelehileng ea li-clampbars tse khutšoane ha feela e 'ngoe ea litekanyo e le kholo ho feta bophara ba clampbar (98 mm).
1. U sebelisa clampbar e bolelele bo felletseng, theha mameno a bolelele 1, 2, 3, &4.
2.Khetha clampbar e khuts'oane (kapa mohlomong tse peli kapa tse tharo tse hokahaneng) tse nang le bolelele bo bonyane bophara ba molomo bo khuts'oane ho feta bophara ba lebokose (e le hore hamorao e ka tlosoa).Etsa memeno ea 5, 6, 7 & 8. Ha u ntse u etsa mameno 6 & 7, ela hloko ho tataisa sekhutlo.
... MABOKOSE ...
Mabokose a nang le lipheletso tse arohaneng
Lebokose le entsoeng ka mahlakore a arohaneng le na le melemo e mengata:
-e boloka boitsebiso haeba lebokose le na le mahlakore a tebileng,
- ha e hloke notching ea sekhutlo,
- ho khaola hohle ho ka etsoa ka guillotine,
-ho phutha hohle ho ka etsoa ka clampbar e hlakileng e tletseng bolelele;
le mefokolo e meng:
- mameno a mangata a tlameha ho etsoa,
-likhutlo tse ngata li tlameha ho kopanngoa, le
-methati e mengata ea tšepe le li-fasteners li bonts'a lebokoseng le phethiloeng.
Ho etsa mofuta ona oa lebokose ho ea pele ka kotloloho mme clampbar e bolelele bo felletseng e ka sebelisoa bakeng sa mameno ohle.
1.Lokisetsa likheo joalokaha ho bontšitsoe ka tlase.
2.Qala theha mameno a mane ka har'a workpiece e kholo.
4.Join lebokose hammoho.
Mabokose a mahlakoreng a nang le likhutlo tse hlakileng
Mabokose a nang le likhutlo tse bonolo a nang le li-flange tsa kantle a bonolo ho etsa haeba bolelele le bophara bo le boholo ho feta bophara ba clampbar ba 98 mm.Ho etsa mabokose a nang le li-flange tse ka ntle ho amana le ho etsa TOP-HAT SECTIONS (e hlalositsoe karolong e latelang - sheba Contents).
4.Lokisetsa sekheo.
5. U sebelisa clampbar e bolelele bo felletseng, etsa memeno ea 1, 2, 3 & 4.
6. Kenya flange ka tlas'a clampbar ho etsa mene 5, ebe u mena 6.
7. U sebelisa li-clampbars tse khutšoane tse loketseng, tlatsa memeno ea 7 & 8.
... MABOKOSE
Lebokose le Flanged le Li-Tabs tsa Huku
Ha u etsa lebokose le nang le li-flanged ka ntle le li-tab tsa sekhutlo le ntle le ho sebelisa likotoana tse arohaneng, ho bohlokoa ho theha mameno ka tatellano e nepahetseng.
1.Lokisetsa sekheo ka li-tab tsa sekhutlo tse hlophisitsoeng joalo ka ha ho bonts'itsoe.
3.Ka pheletsong e ts'oanang ea clampbar e bolelele bo felletseng, etsa mamenonBn ho isa ho 45° feela.Etsa sena ka ho kenya lehlakore la lebokose, ho e-na le tlase ho lebokose, tlas'a clampbar.
4.Ka lehlakoreng le leng la clampbar ea bolelele bo feletseng, theha mameno a flange "C" ho 90 °.
5.Ho sebelisa li-clampbars tse khutšoane tse loketseng, mameno a felletsengnBnho 90.
6.Join likhutlong.
Hopola hore bakeng sa mabokose a tebileng ho ka ba molemo ho etsa lebokose le nang le likotoana tse arohaneng.
RETS'ELISITSOE CLAMPBAR
HO SEBELISA LITHELA (HO SEBELISA SLOTTED CLAMPBAR)
Slotted Clampbar, ha e fanoe, e loketse ho etsa literei le lipane tse sa tebang kapele le ka nepo.Melemo ea clampbar e kentsoeng holim'a sete ea li-clampbars tse khutšoane bakeng sa ho etsa literei ke hore moeli o kobehang o ikamahanya le mochini o mong kaofela, 'me clampbar e phahamisa ka bo eona ho thusa ho kenya kapa ho tlosoa ha sesebelisoa.Leha ho le joalo, li-clampbars tse khutšoanyane li ka sebelisoa ho etsa li-trays tsa botebo bo se nang moeli, 'me ha e le hantle, li molemo ho etsa libopeho tse rarahaneng.
Ha li sebelisoa, likheo li lekana le likheo tse setseng lipakeng tsa menoana ea lebokose le mochini o menahang oa pan.Bophara ba li-slots ke hore li-slots tse peli li tla lekana literei ho feta boholo ba 10 mm, 'me palo le libaka tsa li-slots li joalo.bakeng sa terei ea boholo bohle, kamehla ho ka fumanoa li-slots tse peli tse tla e lekana.(Lisaese tse khutšoane le tse telele ka ho fetesisa tseo clampbar e tla li amohela li thathamisitsoe tlas'a LINTLHA TSEO.)
Ho mena tray e sa tebang:
- Mena mahlakore a mabeli a pele a fapaneng le li-tab tsa sekhutlo u sebelisa clampbar e slotted empa u hlokomolohe boteng ba li-slots.Li-slots tsena li ke ke tsa ba le phello efe kapa efe e hlokomelehang mamenong a phethiloeng.
- Joale khetha li-slots tse peli tseo u tla phutha mahlakore a mabeli a setseng lipakeng tsa tsona.Sena se bonolo haholo ebile se potlakile ka mokhoa o makatsang.Hlakola lehlakore le letšehali la terei e entsoeng ka karolo e itseng ka sekotjana se ka ho le letšehali 'me u bone hore na ho na le sekotjana bakeng sa lehlakore le letona ho sutumelletsa ho sona;haeba ho se joalo, tsamaisa terei ho fihlela lehlakore le letšehali le le sekoting se latelang ebe u leka hape.Ka tloaelo, ho nka liteko tse joalo tse 4 ho fumana libaka tse peli tse loketseng.
- Qetellong, ka bohale ba terei tlas'a clampbar le pakeng tsa li-slots tse peli tse khethiloeng, phutha mahlakore a setseng.Mahlakore a neng a entsoe pele a kena litulong tse khethiloeng ha mameno a ho qetela a phetheloa.
Ka bolelele ba terei e batlang e lekana le clampbar ho ka hlokahala ho sebelisa ntlha e le 'ngoe ea clampbar sebakeng sa slot.
TS'ELISO
SEBELISA MORAKO
Li-backstops li na le thuso ha ho tlameha ho etsoa palo e kholo ea mekoloko eo kaofela e leng sebaka se lekanang le moeli oa workpiece.Hang ha li-backstops li behiloe ka nepo palo efe kapa efe ea li-bends e ka etsoa ntle le tlhoko ea ho lekanya kapa ho tšoaea holim'a workpiece.
Ka tloaelo li-backstops li ne li tla sebelisoa ka bar e behiloeng khahlanong le tsona e le hore ho ka ba le sebaka se selelele moo ho ka boleloang moeli oa workpiece.Ha ho spe cial bar e fanoang empa sekhechana sa katoloso se tsoang sekoting se kobehang se ka sebelisoa haeba bar e 'ngoe e loketseng e sa fumanehe.
HLOKOMELA:Haeba ho hlokahala ho seta backstoptlasaclampbar, joale sena se ka etsoa ka ho sebelisa lesela la sheetmetal le botenya bo lekanang le ba workpiece, hammoho le li-backstops.
PHOMOLO
HO HLAHLOBA HO HLOKA MOSEBETSI OA HAO
Libaka tsohle tse sebetsang tsa Jdcbend li entsoe hore li otlolohe ebile li bataletse ho isa ho 0.2 mm ka bolelele bohle ba mochini.
Likarolo tsa bohlokoa haholo ke:
- ho otloloha ha sebaka se sebetsang sa leballo le kobehang,
- ho otloloha ha moeli o kobehang oa clamp bar, le
- ho tshoana hoa mahodimo ana a mabedi.
Libaka tsena li ka hlahlojoa ka mokhoa o nepahetseng o otlolohileng empa mokhoa o mong o motle oa ho lekola ke ho supa bokaholimo ho bo bong.Ho etsa sena:
- Tsamaisa leballo ho ea sebakeng sa 90 ° 'me u le tšoare moo.(Lebala le ka notleloa sebakeng sena ka ho beha kholara e koalang ka morao-rao ka mor'a selaete sa angle holim'a mofeng).
- Ela hloko lekhalo pakeng tsa moeli o kobehang oa clamp bar le sebaka se sebetsang sa leballo le kobehang.Ho sebelisa li-adapter tsa clamp bar, lekhalo lena ho 1 mm pheletsong e 'ngoe le e 'ngoe (sebelisa sekotoana sa tšepe kapa sekala sa feeler).
Etsa bonnete ba hore lekhalo le ntse le tšoana ho pholletsa le clampbar.Phapang leha e le efe e lokela ho ba ka hare ho ± 0.2 mm.Tliat ke lekhalo ha lea lokela ho feta 1.2 mm mme ha lea lokela ho ba ka tlase ho 0.8 mm.(Haeba li-adjutor li sa bale ka mokhoa o ts'oanang pheletsong e 'ngoe le e' ngoe joale li hlophise bocha joalo ka ha ho hlalositsoe tlasa MAINTENANCE).
Lintlha:
- Ho otloloha ha clampbar joalo ka ha ho hlokometsoe bophahamong (ho tloha ka pele) ha ho bohlokoa kaha sena se batalatsoa ke matla a khoheli hang ha mochini o kenngoe.
- Lekhalo pakeng tsa seketsoana se kobehang le 'mele oa makenete (joalo ka ha ho shebiloe ponong ea moralo le leballo le kobehang sebakeng sa eona sa lapeng) hangata ke 2 ho isa ho 3 mm.Lekhalo lena keesengkarolo e sebetsang ea mochini mme ha e ame ho nepahala ho kobehang.
- Jdcbend e ka hlahisa mameno a nchocho ka li- gauge tse tšesaane le ka thepa e seng ferrous joalo ka aluminium le koporo.Leha ho le joalo ka litekanyo tse teteaneng tsa tšepe le tšepe e sa hloekang u se ke ua lebella ho finyella lesaka le bohale (sheba litlhaloso).
- Ho se ts'oane ha sekontiri ka li-gauge tse teteaneng ho ka ntlafatsoa ka ho sebelisa likotoana tsa likotoana tsa mosebetsi ho tlatsa likarolo tse sa sebelisoeng tlas'a clampbar.
TLHOKOMELO
LIEKETSENG MOSEBETSI
Haeba libaka tse se nang letho tsa mochini li fetoha mafome, li silafetse kapa li senyehile, li ka lokisoa habonolo.Li-burrs leha e le life tse phahamisitsoeng li lokela ho tlosoa, 'me bokaholimo bo tlosoe ka pampiri ea emery ea P200.Qetellong sebelisa spray- on anti-rust joalo ka CRC 5.56 kapa RP7.
HINGE LUBRICATION
Haeba foldara ea Jdcbend sheetmetal e ntse e sebelisoa kamehla, tlotsa kapa o tlotse lihinji hang ka khoeli.Haeba mochine o sebelisoa hanyenyane, joale o ka 'na oa tlotsoa hangata.
Ho fanoe ka masoba ka har'a li-lubrication tse peli tsa letlapa le ka sehloohong la hinge, 'me bokaholimo bo chitja ba block block le bona bo lokela ho sebelisoa ke lubricant ho eona.
LIEKETSENG
Li-adjuster tse lipheletsong tsa clampbar e ka sehloohong ke ho laola tumello bakeng sa botenya ba sesebediswa sa mosebetsi pakeng tsa sekoahelo se kobehang le leballo le kobehang.Li-adjuster li behiloe fekthering ho fana ka tumello ea botenya ba 1 mm ha li-adjuster li supa "1". Ho seta sena bocha, tsoela pele ka tsela e latelang:
1.Tšoara leballo le kobehang ho 90.
3.Ho hlokomoloha matšoao a bontšang, lokisa li-adjuster ho fihlela likotoana tsa 1 mm li "nnoa" hanyenyane feela pakeng tsa ho kobeha le sekoti se kobehang.
4.U sebelisa senotlolo sa 3 mm Allen, lokolla ka hloko grub-screw ho lokolla lesale la knurled la e 'ngoe ea li-adjuster.Ebe u potoloha selikalikoe ho fihlela lekhalo le bontšang "1n.Etsa sena ntle le ho potoloha 'mele o ka hare oa ad juster.Ebe u tiisa hape grub-screw.
5.Reset e 'ngoe ea ho fetola ka mokhoa o ts'oanang.
Libolo tse phahamisang tse kentsoeng nakong ea selemo tse karolong e ka tlase ea li-adjuster li ka 'na tsa khomarela haeba litšila kapa mongobo o etsang mafome o kena. Ha sena se etsahala, se lokise ka ho tobetsa bolo le ho tsoa ka sesebelisoa se lerootho ha u ntse u fafatsa ka setlolo se phunyeletsang se kang CRC. 5.56 kapa RP7.
HO BATLE PHOSO…
Tsela e bonolo ka ho fetisisa ea ho lokisa mathata a motlakase ke ho odara mochine o mocha oa motlakase ho tsoa ho moetsi.Sena se fanoa ka mokhoa oa phapanyetsano 'me ka hona se theko e tlaase.Pele o romella mojule oa phapanyetsano o ka rata ho sheba tse latelang:
1.Mochine ha o sebetse ho hang:
a) Lekola hore na matla a teng mochining ka ho sheba lebone la sefofane ho ON/OFF switch.
b) Haeba motlakase o le teng empa mochini o ntse o shoele empa o ikutloa o chesa haholo, sekoahelo sa mocheso se ka 'na sa khoptjoa.Tabeng ena ema ho fihlela mochine o fola (hoo e ka bang % ka hora) ebe o leka hape.
c) Ho kenella ka matsoho a mabeli ho hloka hore konopo ea START e tobetsoepelemokgoa o huloa.Haeba molamu o huloapelejoale mochine o ke ke oa sebetsa.Hape ho ka etsahala hore seketsoana se kobehang se tsamaee (kapa se koetsoe) ka ho lekana ho sebetsanangle microswitch" pele konopo ea START e tobetsoa. Haeba sena se etsahala etsa bonnete ba hore seqha se sutumelitsoe ka botlalo pele.
d) Monyetla o mong ke hore konopo ea START e kanna ea ba le phoso.Haeba u na le Model 1250E kapa e kholoanyane, bona hore na mochini o ka qalisoa ka e 'ngoe ea likonopo tse ling tsa START kapa footswitch.
e) Hape hlahloba sehokelo se hokahanyang mojule oa motlakase le khoele ea makenete.
f) Haeba clamping e sa sebetse empa clampbar e oela fatšelokollaea konopo ea START joale sena se bontša hore 15 microfarad (10 gF ho 650E) capacitor e fosahetse 'me e tla hloka ho nkeloa sebaka.
g) Haeba mochini o foka li-fuse tsa kantle kapa o tsamaisa li-circuit breakers ha o ntse o kolota, sesosa se ka bang teng ke se lokisang borokho.
2.Lieht clamping oiwrates but full clamping doe§ a not:
a) Sheba hore na "Angle Microswtich" e ntse e sebelisoa ka nepo.[Switch ena e sebelisoa ke sekoahelo sa koporo se sekoere se khomaretsoeng ka lehlakoreng le bontšang mochine.Ha sebapa se huloa sekoahelo se kobehang se potoloha se fanang ka ho potoloha ho actuator ea koporo.Ac tuator le eona e sebetsa microswitch ka hare ho kopano ea motlakase. Hula mohele ho tsoa 'me u kene. U lokela ho utloa microswitch e tobetsa ON le HO TLOA (ha feela ho se lerata le lengata haholo ka morao).
Haeba switch e sa tobetse HO ON le HO TLOHA joale suthela leballo le kobehang holimo e le hore mochini oa ho kenya letsoho oa koporo o ka bonoa.Fetolela leballo le kobehang holimo le tlase.Sebapali se lokela ho potoloha ho arabela lebaleng le kobehang (ho fihlela se ts'oara liemelong tsa sona).Haeba e sa etse joalo, e ka hloka matla a eketsehileng a ho itšoarella.Ho 1250E khaello ea matla a ho ts'oara hangata e amana le li-screws tse peli tsa hlooho tsa M8 pheletsong efe kapa efe ea actuator.
HO BATLE PHOSO
shaft e sa tiisehang.Haeba actuator e potoloha
'me e tšoara OK empa e ntse e sa tobetse microswitch joale e ka hloka ho lokisoa.Ho etsa sena, qala ka ho ntša mochine ho tloha setsing sa motlakase ebe o tlosa phanele ea ho kena ka motlakase.
Ho Model 1250E sebaka sa ho bulela se ka fetoloa ka ho fetola screw e fetang ka har'a actuator.Sekoti se lokela ho lokisoa e le hore switch e tobetse ha ntlha e ka tlase ea leballo e kobehang e tsamaile hoo e ka bang 4 mm.(Ho 650E le 1000E phetoho e tšoanang e finyelloa ka ho koba letsoho la microswitch.)
b) Haeba microswitch e sa tobetse ON le OFF le hoja actuator e sebetsa hantle joale sesebelisoa ka boeona se ka kopanngoa ka hare 'me se tla hloka ho nkeloa sebaka.
c) Haeba mochini oa hau o kentsoe swichi e thusang, etsa bonnete ba hore o fetotsoe sebakeng sa "NORMAL".(Ke feela clamping e bobebe e tla fumaneha haeba switch e le honAUX CLAMP" boemo.)
3 Clamping e lokile empa li-Clampbars ha li lokolloe ha mochini o tima:
Sena se bontša ho hloleha ha potoloho ea reverse pulse demagnetising.Lebaka le ka sehloohong e ka ba sehanyetsi sa matla sa 6.8 Q.Hape hlahloba li-diode tsohle le monyetla oa ho khomarela mabitso ho relay.
4 Mochini o ke ke oa koba boima lakane:
a) Lekola hore na mosebetsi o ka har'a litlhaloso tsa mochini.Haholo-holo hlokomela hore bakeng sa 1.6 limilimithara (16 gauge) kobang thebartolomeoe tlameha ho kengoa lebaleng le kobehang le hore bophara bo fokolang ba molomo ke30 limilimithara.Sena se bolela hore bonyane 30 mm ea thepa e tlameha ho tsoa pheletsong e kobehang ea clampbar.(Sena se sebetsa ho aluminium le tšepe ka bobeli.)
Nako ea poso: Oct-11-2022